THIS MODEL IS MORE SENSITIVE AND LIGHTER THAN
THE 【RC-SC EX】.
ITS LIGHT AND SHARP FEEL WILL BE AN OVERWHELMING ADVANTAGE IN SITUATIONS WHERE DELICACY IS REQUIRED.
← 横スクロールしてください →
| Functions | Type | Color | Price |
|---|---|---|---|
| 86mm R24XL Monocoque carbon knob |
|
|
¥19,000＋tax |
| 90mm R24XL Monocoque carbon knob |
|
|
¥19,000＋tax |
Can be attached to most Shimano, Daiwa, and Abu reels. (Special nuts compatible with each manufacturer are provided as standard.)
*SOME REELS AND DAIWA C-BOLT TYPES (STEED, JILLION, RYOGA, Z, MOAZAN, etc.) REQUIRE A SEPARATE C-BOLT.
01Handle knob
A monocoque (hollow structure) is used to achieve light weight, high rigidity, and extreme sensitivity.
Carbon tubing was used for the carbon knob and inner parts without compromise.
In addition, by coating the carbon knob with matte rubber, we succeeded in increasing its gripping power.
It will accurately transmit signals from underwater with ultimate sensitivity never seen before.
02plate (often as in "tectonic plate")
The RC-SC uses a 3.5mm-thick plate to reduce weight and enable light handle operation.
The RC-SC is made of 45° and 90° carbon fibers to provide strength to withstand torsional loads from all directions.
Furthermore, by adopting a crank shape that suppresses torsion and using carbon prepreg for the plate, rigidity that could not be achieved until now has been obtained.
03shaft
A 4Φ SHAFT IS ADOPTED FOR LIGHTER WEIGHT AND LIGHTER HANDLE OPERATION.
THE POWER BALANCE OF THE ENTIRE HANDLE IS EVENED OUT AND THE RIGIDITY OF THE ENTIRE HANDLE IS INCREASED.
04accessory
A shared washer for [for Shimano] and [for Daiwa and Abu] and a special nut left and right are included.
*For some Daiwa reels, C-bolts must be purchased separately. (Refer to the compatibility chart)